Making the invisible, visible
EMF Detection Meter
Identify harmful non-native EMFs in your environment
What are EMFs?
EMFs are Electro Magnetic Fields and/or Frequencies.Typically, magnetic and electric forces are referred to as fields, while radio-frequencies (RFs) and microwaves are often talked about as frequencies. Nature provides us with beneficial EMFs, like mother earth’s Schumann resonances (extremely low EMFs) and infra-red and red frequencies of a morning sunrise, that our bodies require for optimal health.
However, power lines, cell towers, modern wireless devices, and anything man made that uses electricity produces electromagnetic fields (EMFs) that are not native to this earth. These artificial EMFs are technically referred to as ‘non-native EMFs’ or ‘nnEMFs for short.’ Artificial forms of EMFs typically have alternating fields or pulsed radiation that can disrupt many processes that maintain optimal health such as, lowering sleep quality, altering the gut biome, and damaging our DNA directly. This ultimately leads to disease and accelerated aging. The negative impacts of artificially generated EMFs are based on exposure times, intensities and frequency of exposures.
Over 3,000 Studies on The Harmful Effects of nnEMFs
Over 244 scientists from more than 41 countries have expressed their “serious concerns” regarding the ubiquitous and increasing exposure to EMF generated by electric and wireless devices. EMF Scientist Appeal https://emfscientist.org/index.php/emf-scientist-appeal
“Studies also show that all frequencies of EMFs can react with and damage DNA, leading either to cell death or remaining as a mutation”
See the Mito Meter in Action
Watch this product in use as we test the EMF readings of some commonly used technology that we are all exposed to in our daily lives.
What Makes The Mito EMF Meter so Good?

We find ourselves bombarded by more and more harmful EMFs from more sources across a broader section of the electromagnetic spectrum. More disturbing is that the rate of change is increasing exponentially with the roll out of 5G, driverless vehicles, cryptocurrencies, virtual reality and the Internet of Things. The only way to know you are being exposed to harmful EMFs is to make the invisible, visible by getting a reliable EMF meter.
There are many EMF meters on the market ranging from $200 to $40,000. We wanted to find an affordable solution that was compact, durable, precise, tested all major frequencies and most importantly was easy to use and interpret.
The Mito EMF Meter does all of that and lots more.
- Locate spy cameras and use as a wireless bug finder
- Detect your microwave over leakage
- Use with or without the sound alarm
- Very easy to use and to interpret
- Designed for both beginners and advanced users with a wide set of applications
- USB connection for a data downloading constant power supply. Possible to save the data to excel for in-depth analysis and interpretation
- Incredibly accurate and precise for its size
- Commitment to improving software via easy to upload software upgrades
- Small, compact handheld design
- Monitor wireless LAN (Wi-Fi) installations
- Fits in your hand so you can test inconspicuously
- Capture transmission behavior of smart meters
- Measure low frequency magnetic fields from wiring, electrical devices and household appliances
- Measure low frequency electric fields from power lines, fuse boxes and home appliances
- Capture data with location (on supported Android devices) later to place on Google Earth
- Measure radio frequencies and microwaves from cell towers, smart meters, Wi-Fi, Bluetooth and other various wireless/cordless transmitters
FAQs
What are EMFs
Where will I find nnEMFs?
What are some of the human health effects of nnEMFs?
What are the most common sources of nnEMFs?
Will the Mito Meter pickup 5g frequencies?
What can I do to limit my nnEMF exposure?
2.Never give a wireless device (iPhone, tablet etc.) to a child under 13. Make sure it is in airplane mode if you must give your child a device. Microwave penetration into the brain of a child is deeper and greater. Microwaves are also more dangerous to a child’s developing brain and nervous system.
3.Replace your wireless devices with wired equivalents. This includes replacing cordless “DECT” phones, turning off Wi-Fi routers (at the very least, use a timer to turn it off at night), using an Ethernet cable rather than Wi-Fi for computers, smart TV’s, baby monitors, gaming consoles and opting out of having a wireless “Smart” electricity meter installed.
4.Use your smart phone safely – keep the phone on “Airplane” mode most of the time. Never put a cell phone to your head. Use speaker phone or an Air-Tube Headset for voice calls. Do not carry a cell phone in your pocket or bra unless it is on “Airplane” mode. Do not use the phone while in a car – radiation levels are increased. If you must use a cell phone, do so primarily for text messages and emergencies. Save high data activities and voice calls for a wired internet connection at home.
5.If you still use a microwave oven, consider replacing it with a steam convection oven, which will heat your food as quickly and far more safely. Induction cooktops generate very high magnetic fields and should be replaced with gas.
6.Don’t buy any smart appliances (most new appliances now come with microwave RF chips)
7.Create a sleep sanctuary. Unplug everything in your bedroom at night. Keep cell phones, iPads and other electronics out of your bedroom. Use a simple battery-powered alarm clock. Turn off the electrical circuit breaker to your bedroom at night. Keep a flashlight by your bedside table.
8. Join our Mito Movement to learn more strategies to combat what many experts feel is the greatest environmental health risk facing humanity today.
Product Specifications
- Analog RF and Digital burst RF (GSM, TDMA, CDMA, LTE, DECT, ZigBee, Bluetooth, UWB, Wi-Fi, WiMAX 2.4 GHz, 3.6 GHz, 5.8 GHz, 2,3,4 generations).
- RF accumulation - store to the meter’s memory the exposure time to each of the values
- Small, compact handheld design, 69 mm X 110mm. Rechargeable LiPo battery. USB cable for charging.
- Weight 1.7 ounces or 50 grams CE and RoHS certified RF Frequency range: 100 MHz to 8 GHz (RF meter), (-60 dBm to +5 dBm). LF-Magnetic: 50 Hz to 10 KHz – 0 mG to 50 mG with 0.1 mG resolution. E-field bandwidth of 50 Hz -10 KHz - 1v/m to 1000 v/m.
- Show LF Magnetic fields main frequency 40 Hz – 15 KHz. Show LF Electric field main frequency 40Hz - 15KHz. 9 LED’s showing the intensity. Sound alarm. Sampling rate: 20,000/sec.
- Capture data with location (on supported Android devices) later to place on Google Earth PC software works on Windows 7 and above. Android App works on most devices with version 4.3 and above.
- USB connection for a data downloading and constant power supply. Possible to save the data to excel for in-depth analysis and interpretation.
Order Now
Electro Magnetic Field Meter
Box Contains 1 x EMF Meter, 1 x USB Active Smart Cable, 1x USB-C to USB Adaptor & 1x USB to Micro USB Adaptor. Warranty 2 Years, Firmware 2021 MRx Custom Calibrated. Free Monitoring/GPS Software for PC/Mac/Andriod, Free GEO_XI.I Geostress Assist Protocols, Free Worldwide Postal via Australia Post.
AUD $289.00
