New MITO Customers

by | Feb 9, 2023 | EMF/RF Basics | 0 comments

WHAT TO MEASURE

Check out our EMF/RF Basics pages. You will find helpful information here to assist you in screening/measuring your environment. For advanced users, check out the Mito MRx Measurement Methods, RF-Xs RF-X6 & LFM-X built-in hidden features.

LITHIUM-ION BATTERY
  • When charging the black edition MitoHQ Meter you cannot see the red charging light through the black case, as stated in the instructions. 

  • When you switch the MitoHQ Meter on, the LED lights display the battery level during the cycling-on process. The left LED light sweep indicates the battery level. Click here to watch a video on how to check the battery level. 

  • Two solid green lights will be displayed on RF Mode when the battery is at 10% power capacity. 

  • The battery will lose charge over time, so remember to top up before heading out. You only need 10 to 20 minutes to top the meter up via a USB outlet. 

  • Fully charging the battery from flat takes about an hour. 

  • You cannot overcharge the battery. However, it’s not good for lithium batteries to stay on charge endlessly for days or weeks on end, as this can cause the lithium battery to swell. 

USB ACTIVE CABLE
  • Standard USB cables will not work with the Envirosens PC/Mac/Android monitoring/GPS software and will only charge the Mito Meter. 
  • Take care when using the supplied active USB cable, as damage can occur when forced, knocked, or pulled. 
WARRANTY
  • The MitoHQ Meter is the most robust 3-in-1 EMF meter on the world market today, and why it comes with a 24-month replacement warranty.
PRODUCT CARE
  • Keep the meter out of direct sunlight and away from heat. 
  • Place the meter in a plastic zip-lock bag if around sand or water.  
  • Store the meter in a dry place. 
RETURNS

With our extensive in-house pre-testing before dispatch, the likelihood of the meter faulting is very slim.  In the unlikely hood event of this happening, please email support@mitometer.com for instructions if a fault is detected. If you change your mind and do not want the meter, and the meter is returned “unused” in new condition with the supplied cable and adaptors within two weeks of the purchase date, we will refund the purchase price, less the postal charges.  

MONITORING SOFTWARE

Download the Windows, Android and Mac monitoring software here

DEMONSTRATION

Scroll down the resource page to see the meter in action and the software demonstration in this link here

SUPPORT

Contact our support team if you have any issues or questions. If need be, you can have an expert walk you through the screening process at your home or workplace via a phone or video call. (N/C)

support@mitometer.com 

ABOUT THE EMF METER

All the 2023 MitoHQ Meters have the latest custom-mapped MRx 1.1.78(x) firmware installed, which is weighted and calibrated to ensure that what you measure at home is the same as all our meters via the easy-to-read colour LED light indicators.

Note other 3-in-1 EMF meters, including the most popular five-star rated meters sold on Amazon, vary drastically in their measurement readings between meters, leading to false-positive readings or no results in EMF hotspots.

At the Mito workshop, we are meticulous in ensuring every meter, cable, battery, and adapter that leaves the workshop before dispatch meets our strict eleven-point validation criteria so you can have complete confidence in screening your environment with your newly purchased 2023 3-in-1 EMF meter.

OUR TEST GEAR

Aaronia v4/v5 spectrum analyzers, with a selection of calibrated antennas and cables, are utilised in bench testing and calibrating our meters.