by David Blake | Feb 22, 2022 | EMF/RF Basics, Mito Meter
Thank you for your purchase of the MitoHQ Meter, the worlds simplest and smallest 3 in 1 EMF meter. All our 2022 meters have the latest custom mapped MRx 1.1.78(x) firmware installed, which is weighted and calibrated to ensure that what you measure at home is the same...
by David Blake | Aug 22, 2021 | EMF/RF Basics, Mito Meter
What EMF levels are safe, and how many lights on my meter is bad? These are commonly asked questions. Some would say the short answer is there are no safe non-native EMF levels, and others say non-ionising EMF’s present no danger. One thing we can all agree on...
by David Blake | Jun 16, 2020 | EMF/RF Basics, Mito Meter
Mito Meter Measurement & Mitigation Methods – EMF/RF Basics The Mito Meter only has three modes to select from when taking measurements making the meter the easiest and most compact EMF/RF meter in the world to use. To break down how EMF’s are measured...
by David Blake | Jun 5, 2020 | EMF/RF Basics, Mito Meter, RF Measurement Guide
Mito Meter Measurement & Mitigation Methods – EMF/RF Basics Below is an overview of our Mito RF checklist. RF is short for Radio Frequencies, or more commonly known as microwave radiation when used in the context of discussing cell phone towers, Wi-Fi,...
by David Blake | Jun 5, 2020 | EMF/RF Basics, LFM Measurement Guide
Mito Meter Measurement & Mitigation Methods – EMF/RF Basics – Magnetic Field Measurements.Here’s a quick checklist for measuring LFM, Low-Frequency Magnetic Field’s. 1/ The Mito Meter is a single axis gauss meter. This means its sensor is...
by David Blake | May 28, 2020 | EMF/RF Basics, LFE Measurement Guide
Mito Meter Measurement & Mitigation Methods – EMF/RF Basics – E-Field Measurements. Here is a quick checklist for measuring electric fields in the Mito Meter LFE Mode. Low-Frequency Electric fields are also called E-Field’s in the world of...