by David Blake | Jan 23, 2021 | Mito Meter
Mito Meter Android users need to check this exciting software out. Not only will this app enable you to monitor or record your EMF environment, but it will also map your results via real-time GPS logging. To set up the software on your phone/device, simply select...
by David Blake | Jul 29, 2020 | Firmware, Mito Meter, Q&A, RF Measurement Guide
All new black edition Mito Meters will be delivered with the 1.1.075 firmware. (April 2020 on) This upgrade greatly improves performance on RF-X MODE and mildly increases sensitivity in RF and LFE Modes on the previous White Mito Meter versions. The main new feature...
by David Blake | Jun 16, 2020 | EMF/RF Basics, Mito Meter
Mito Meter Measurement & Mitigation Methods – EMF/RF Basics The Mito Meter only has three modes to select from when taking measurements making the meter the easiest and most compact EMF/RF meter in the world to use. To break down how EMF’s are measured...
by David Blake | Jun 5, 2020 | EMF/RF Basics, Mito Meter, RF Measurement Guide
Mito Meter Measurement & Mitigation Methods – EMF/RF Basics Below is an overview of the RF checklist. (Radio Frequencies) 1/ The Mito Meter has a single axis antenna so its important to move around the meter to find the highest reading. Move the meter around...
by David Blake | Jun 5, 2020 | EMF/RF Basics, LFM Measurement Guide
Mito Meter Measurement & Mitigation Methods – EMF/RF Basics – Magnetic Field Measurements.Here’s a quick checklist for measuring LFM, Low-Frequency Magnetic Field’s. 1/ The Mito Meter is a single axis gauss meter. This means its sensor is...
by David Blake | May 28, 2020 | EMF/RF Basics, LFE Measurement Guide
Mito Meter Measurement & Mitigation Methods – EMF/RF Basics – E-Field Measurements. Here is a quick checklist for measuring electric fields in the Mito Meter LFE Mode. Low-Frequency Electric fields are also called E-Field’s in the world of...